Pumps

Pool Pumps

 
Brock's selection of Commercial Pool Pumps have far too many options in regards to fittings, horsepower, electrical hook up and more to sell appropriately on-line. Please contact us to discuss options and for price and availabilty.

Non-Corosive Self Priming Pumps

The Speck Model 95 is setting new standards with many firsts in the industry like the largest one piece plastic casing design with integrated strainer basket, easy on/off two-piece lid, and 4" quick disconnect unions. These features combined with a unique mechanical seal results in a medium head pump with the "highest flow" of any one piece plastic pump. This pump is ideally suited for high-rate sand filter applications as well as water features.

Browse the 6 electric models available

Cast Iron Self Priming Pumps

The Hydro5000 pump is a high performance, self priming pump, designed for aquatic facilities, water parks and large commercial swimming pools. Hydro5000 commercial pump incorporates a reinforced thermoplastic strainer housing for significant weight reduction and improved corrosion resistance.

7.5HP / 10HP / 15HP / 20HP Models Available

* DOWNLOAD BROCHURE

 

Cast Iron Self Priming Pumps

This line of self-priming is designed with an extra large, integral pump strainer (over 1,100 in of volume). Features an enclosed, bronze impeller for high efficiencies and low NPSH requirements. Available in 10/15/20hp sizes with 3-phase motors or a 10 hp single phase motor. 1,750 rpm motors for whisper quiet operation and extended service life. Max capacity: 800gpm / maximum head: 130 feet.

7.5HP / 10HP / 15HP / 20HP Models Available

 

 

Non-Corosive Self Priming Pumps

Our self-priming pumps provide a technologically advanced alternative to traditional pumps with cast iron housings. HCP thermoplastic housing make them lighter weight, for easier installation and they won’t rust in corrosive enviroments. Quiet and efficent. Clear lid allows visual inspection of strainer basket. Series ranging from 5.5hp, 7.5hp, 10hp and 20HP. Flow rates ranging from 235 - 668gpm.

5.5 HP / 7.5HP / 10HP / 12.5HP Models available

* DOWNLOAD PRODUCT BROCHURE 
* DOWNLOAD PRODUCT MANUAL

Cast Iron Flooded Suction Pumps

The 530 series end suction centrifugal can be trimmed to a specific diameter to satisfy your exact pumping requirements resulting in lower operating costs. This series is available close-coupled (in horizontal or vertical mounting configurations) or frame mounted with 1150~3450rpm motors or 1 through 150hp; with sizes to 10”.

7.5HP / 10HP / 15HP / 20HP Models Available

 

 

 

TOLL FREE: (800) 332-2360 | EMAIL: This e-mail address is being protected from spambots. You need JavaScript enabled to view it. | FAX: (800) 633-4858
Copyright © 2012 Brock Enterprises Worldwide All Rights Reserved. Web Design by Info-Mgt.net
Checkout
Contact Us
Follow us on Facebook
Follow us on LinkedIn
Follow us on Twitter