Handicap Access

ADDITIONAL PRESET ANCHOR
#5836	$228.00	Quantity:
SPARE BATTERY
#5837	$279.00	Quantity:
SAFETY COVER
#5853	$156.00	Quantity:
HEADREST
#5835	$196.00	Quantity:

ADDITIONAL PRESET ANCHOR
#5836	$228.00	Quantity:
SPARE BATTERY
#5837	$279.00	Quantity:
SAFETY COVER
#5853	$156.00	Quantity:
HEADREST
#5835	$196.00	Quantity:

The Lolo is the industry’s most affordable ADA compliant Swim-Lift®. The Lolo not only complies with the ADA laws, but it also is in compliance with U. S. Access Board Guidelines written specifically to cover recreation facilities, soon to be come law. The Lolo incorporates many of the strength, operation and performance proven features that are associated with the industry’s most popular lifts - the Gallatin and the Pintlar. The recreation facility patron who may experience difficulty entering or exiting a swimming pool is extended autonomy if a Lolo lift is employed. The Lolo is designed to accomodate in-ground pools without customization. The Lolo accomodates in-ground pools having a minimum deck to pool bottom dimension od 42” (typically 36” water depth). Standard units will accomodate various anchor locations from the pool wall. • 400lb. operating lifting capacity. • ADA-ABA Compliant. • Dual Lift operating controls, allowing operation from the deck and/or pool. • Dual anchor points for added stability, easy to install, even on existing facilities. • Two armrests, outer armrest flips up allowing for horizontal transfer from a wheelchair.. • Standard adjustable headrest. • Swing out footrest allows for ease of transfer.

LOLO RETROFIT ANCHOR KIT (EXISTING INSTALLATION)
#5578	$356.00	Quantity:
LOLO PRESET ANCHOR KIT (NEW CONSTRUCTION)
#5579	$356.00	Quantity:
OPTINAL TRANSPORT WHEEL KIT
#6046	$289.00	Quantity:
BOOSTER PUMP KIT (FOR LOW PRESSURE APPLICATIONS)
#6047	$1,943.00	Quantity:

500 pound capacity remote controlled battery power lift

TRAVELER XRC500 The Traveler™ is an affordable battery operated, wireless, radio frequency controlled aquatic assisted lifting device. The Traveler™ features a stainless steel extended reach superstructure, no paint to chip, no dissimilar metals to corrode, all metallic components are electro-polished and passivated, ensuring the ultimate in corrosion resistance, a 24-volt operating system, three operating control points allowing for operation of the lift from the pool deck, the water and the seat. This new lift is certified for a 500-pound operating load capacity, with a 1.5-safety factor. A single anchor allowing for ease of installation is available. Other features include a multi-function armrest, a large molded seat with wide web seat belt with a non-corroding cam lock buckle. Swing out footrest allows for ease of transfer, standard adjustable headrest, patented overhead transfer assist system. A lift transport cart is available. All metallic components of the Traveler™ are electro-polished and passivated. There is no paint to chip, no dissimilar metals to corrode and it is backed by a five-year limited warranty. Anchor and transport cart sold separately. The Traveler XRC500 facilitates installations with setback dimensions of 6” to 33”. ADA/ABA Compliant and Title 24: California Code of Regulations.
#6071	$6,478.00	Quantity:
ANCHOR SOCKET
#6072	$197.00	Quantity:
SPARE BATTERY
#6073	$239.00	Quantity:
CADDY CART
#6074	$897.00	Quantity:

TRAVELER ANCHOR (INCLUDES LID AND KEY)
#6072	$176.00	Quantity:
TRAVELER BATTERY
#6073	$239.00	Quantity:
TRAVELER TRANSPORTATION COST
#6074	$482.00	Quantity:

This lift is designed for budget conscious facilities that have only occasional need for handicapped access. This easy to use manual hydraulic uses our standard corrosion-resistant, stainless steel design. It is completely portable and removes in seconds without tool. This economical lift may also be used for above-ground spas and whirlpools. Hotels, motels, and health clubs can have one lift to service both pool and the spa. Simply order an additional anchor. Unit comes complete with overhead bar, chains, sling, and anchor. 3 year limited warranty and 400 lb. rated load. Weight 65 lbs. VIEW PRODUCT DIMENSIONS

ANCHOR SOCKET FOR #184 LIFT
#5226	$229.00	Quantity:

Our Aquatic Access lift is water powered. No electricity or pump is required. This lift is easy to use, reliable, installs easily with a single deck socket, offer superior lifting capabilities of 400 lbs. at 55 psi and roll easily out of the way on casters when not in use. These lifts offer upper and lower controls at both pool and deck level which allows the lift to be operated independently by the person in the chair or the attendant on deck. Constructed of stainless steel and noncorrosive plastic. This lift is an excellent value. Aquatic Access II (180 o turn) The Aquatic Access Model IGAT-180 is user-operable. It allows the greatest access from the deck for the user and any assistant. Side-to-side transfers are easy the footrest flips up and the mounting arm is under the seat allowing unobstructed transfers. Seat rotates forward into the pool and backwards when exiting. The standard seat has right arm only. A flip-up outer arm is available. Independent Operation Automatic 180 Seat Turn (Model IGAT-180) Water Pressure Powered Lifts 400 pounds at 55 PSI operating pressure Vertical Seat Travel – 42" Can be padlocked in the Up Position Installs in Deck Socket Portable – Lift Out and Roll Away Meets the recommendations of the A.D.A. VIEW PRODUCT DIMENSIONS

AQUATIC ACCESS II IGAT-180
#3060	$3,944.00	Quantity:
AQUATIC ACCESS (ADC DECK MOUNTED LIFT)
#6127	$4,429.00	Quantity:

FLIP UP LEFT OUTER ARM
#3061	$274.00	Quantity:
HEADREST
#3062	$274.00	Quantity:
SEAT BELT
#3063	$42.00	Quantity:
ANCHOR SOCKET
#3064	$134.00	Quantity:
VINYL LINER POOL PAD
#3065	$84.90	Quantity:
ANCHOR SOCKET COVER
#3066	$98.00	Quantity:

Introducing the Gallatin the newest model in our line of handicap pool access lifts. Fully automatic and water powered this lift is designed for use with both in-ground swimming pools and/or spas with 12" or more of overall depth (deck to spa bench). Dual control handles allow users to operate lift from both deck and pool side. Available with a pull-out leg only. This same lift can be relocated to the poolside and assist swimmers in and out of your in-ground pool. Uses the standard SwimLift ® anchor, so it can be retro-fitted onto your existing poolside anchor. The Gallatin Lift will lift 400 lbs. at 55 psi, comes with a full 5 year warranty, and is ADA compliant under the new guidelines proposed. VIEW PRODUCT DIMENSIONS

GALLATIN SWIM LIFT (ORDER ANCHORS SEPARATELY SEE BELOW) The Gallatin is designed to accommodate both in-ground pools and spas without customization. The Gallatin requires no more than 12” of total depth (deck to floor/bench) for proper installation. The standard unit will accommodate anchor locations of 18” to 30” from the pool wall. • 400lb. operating lifting capacity. • ADA-ABA Compliant. • Dual Lift operating controls, allowing operation from the deck and/or pool. • Dual anchor points for added stability, easy to install, even on existing facilities. • Two armrests, outer armrest flips up allowing for horizontal transfer from a wheelchair. • Standard adjustable headrest. • Swing out footrest allows for ease of transfer.
#5431	$5,148.00	Quantity:
SWIM-LIFT® GALLATIN WP400 ACCESSORY KIT This kit includes a padded headrest and rescue board assembly, both of which can easily be attached to an existing gallatin lift or added to a new one. Spineboard is included. The headrest provides head and neck support for those with marginal upper body control. The rescue board assembly slides directly onto the Gallatin seat receiver in place of the seat assembly. Rescued swimmers can be lifted out of the pool to the deck level without unnecessary strain.
#6195	$619.00	Quantity:

GALLATIN RETROFIT ANCHORS (FOR EXISTING POOL DECKS)
#5578	$356.00	Quantity:
GALLATIN PRE-SET ANCHORS (FOR NEW CONSTRUCTION)
#5579	$356.00	Quantity:

The PAL is completely portable. It requires no mounting to the pool deck. It contains over six hundred pounds of counter weight to provide a lifting capacity 300 lbs. The PAL is heavy, but it rolls easily on its ball bearing casters. It has a padded handle that makes it easy to push. Since the PAL moves, it can be used to service multiple pools. You do not have to sacrifice a swim lane to mount the unit. It can be put away when not in use. The PAL features a mechanical actuator, the same reliable technology used on hospital beds all over the world. The actuator is power by a rechargeable 24 volt battery, a consistent power source that insures that the PAL will work when you need it to work. The unique design of the PAL allows it to be adaptable to virtually and swimming pool configuration. Its arms reach over the pool edge and can vary in length depending on the amount of require clearance. The PAL works well with edgeless designs, as well as with pools with curbs, gutters and skimmers. The PAL can be operated by either the user or attendant. The Hand Control is completely waterproof. The controls are easy to understand. Set up consists of rolling the lift into place along the edge of the pool and locking wheels. Pricing includes a footrest. Battery included. Specifications: Overall Height-73''; Base Height-23.5''; Base Length-37.25''; Base Width-29.25''; Total Weight-845 lbs.; Power-24vDC; Battery Life-8 hours; Lifting Capacity-300 lbs.

PAL PORTABLE LIFT
#5091	$6,198.00	Quantity:
PAL-CAL-PACKAGE PAL LIFT WITH ARM REST, COVER AND SPINEBOARD ATACHMENT
#6198	$6,817.00 $6,612.00 On Sale!	Quantity:
PAL KIT. PAL LIFT WITH PROTECTIVE COVER
#6196	$6,596.00	Quantity:

PAL ARM REST
#5432	$288.00	Quantity:
PAL SPINEBOARD ATTACHMENT
#5433	$386.00	Quantity:
PAL SPINEBOARD CONVERSION KIT
#5434	$299.00	Quantity:
PAL BATTERY
#5435	$198.00	Quantity:
PAL FULL COVER FOR PAL
#5437	$378.00	Quantity:
PAL STABILITY VEST
#5439	$189.90	Quantity:
PAL SEAT BELT ASSEMBLY
#5440	$48.50	Quantity:

The Splash! aquatic lift is a semi-portable* lifting system designed for swimming facilities seeking to provide user-friendly access to their swimming pools. The Splash! is battery powered and is operated by a screw driven actuator. The design and durability of the system ensures consistent operation and minimizes problems. The standard Splash! #5316 is attached to the pool deck using a standard, 1.90 ID round anchor socket used for starting blocks or backstroke flag stanchions. The normal mounting distance for the anchor is 18 inches from the pool’s edge, however this dimension can vary depending on the configuration of the pool. Our Splash! HD (Heavy Duty) Model #5316HD uses a square anchor, which is included in the pricing. The manufacturer requests a Poolside Configuration Worksheet with each order so that the lift ban be engineered to match the customer’s pool specifications. The Splash! is virtually maintenance free. The components are made from corrosion-resistant materials, including powder-coated aluminum (arms, housing), powder-coated stainless steel (base, seat frame), and powder-coated, zinc plated steel (mast). The unique seat of the lift was specifically designed to provide the user with the greatest possible comfort and ease of transfer. The hand control is completely waterproof, and allows either the user or the attendant to control its operation with ease. The control box and battery are water resistant and should be protected from long exposure to water. A small, waterproof cover is included with each lift to cover the control box when the system is in use. If the lift is used outdoors, an optional full cover is available for purchase and is recommended to use to protect the system. Pricing includes a footrest and seatbelt.

STANDARD SPLASH LIFT (MAX LIFTING CAPACITY IS 300 LBS. USES EXISTING ANCHOR SOCKET)
#5316	$3,495.00	Quantity:
SPLASH-CA-PKG Includes Splash lift, arm rest, caddy and cover
#6201	$49,330,000.00 $4,897.00 On Sale!	Quantity:
SPLASH, EXTENDED REACH CA-PKG includes Splash extended reach lift, arm rest, caddie and cover
#6203	$5,114.00	Quantity:
SPLASH, EXTENDED REACH PKG ( includes Splash extended reach lift, caddie and cover
#6202	$4,895.00	Quantity:
SPLASH, PKG includes Splash lift, cover and caddy
#6200	$4,722.00 $4,616.00 On Sale!	Quantity:
SPLASH, EXTENDED REACH (FOR POOLS WITH WIDE GUTTERS)
#6199	$4,579.00	Quantity:
SPLASH LIFT HD (HEAVY DUTY) MAX LIFTING CAPACITY - 400 LBS. (ANCHOR SOCKET INCLUDED)
#5316HD	$4,346.00	Quantity:
SPLASH CADDY CART
#5317	$420.00	Quantity:

ANCHOR SOCKET FOR SPLASH LIFT (FOR STANDARD SPLASH LIFT #5316)
#615	$139.75	Quantity:
SPLASH CADDY CART
#5317	$420.00	Quantity:
SPLASH SPINE BOARD ATTACHMENT (SPINEBOARD NOT INCLUDED)
#5318	$384.00	Quantity:
PROTECTIVE COVER FOR SPLASH LIFT
#5319	$194.00	Quantity:

The Patriot Pool Lift™ is the only completely portable, ADA compliant aquafit lift on the market that has a 450lb (205kg) lifting capacity. This lift requires no anchors and can easily be removed from poolside when not needed. The lift features a compact, low profile frame that does not intrude into the pool when not being used. A unique sliding mechanism allows the lift to be transported easily on its cart and then lowered onto the pool deck for use without fastening any hardware. The lift is compact enough to fit through any ADA compliant doorway. FEATURES • 450lb (204kg) lifting capacity • Rechargeable 24v battery operation • Submergible hand-held push button controls • Adjustable lap belt • Adjustable & removable footrest • Dual flip up arm rests • Field convertible to an anchored lift • Five year Pr-rated warranty

HEADREST
#6934	$184.00	Quantity:
CHEST STRAP
#6935	$49.00	Quantity:
COVER
#6568	$187.00	Quantity:
SPARE BATTERY
#5837	$279.00	Quantity:
PATRIOT ACCESSORY UPGRADE KIT (include extra battery, headrest, chest strap and cover)
#6936	$579.00	Quantity: