POOL MAINTENANCE

Subcategories for POOL MAINTENANCE:

Products:

AMSE/ANSI APPROVED DRAIN COVERS

Brock offers a variety of drain covers meeting all currently available requirements for NSF listed ASME/ANSI # A112.9.8 2007 main drain covers. Please visit our website, www.brockent.com where you get to read The Virginia Graeme Baker Act.

9" X 9" HIGH FLOW COVER AND FRAME 9" x 9" Cover and frame Floor/Wall: 224 GPM at 1.6 fps. (Floor/Wall: 207 GPM at 1.5 fps.)
#6505	$148.00	Quantity:
12" X 12" HIGH FLOW COVER AND FRAME 12" x 12" Cover and frame Floor/Wall: 361 GPM at 1.3 fps. (Floor/Wall: 400 GPM at 1.5 fps.)
#6506	$189.00	Quantity:
18" X 18" HIGH FLOW COVER AND FRAME 18" x 18" Cover and frame Floor/Wall: 775 GPM at 1.4 fps. (Floor/Wall: 828 GPM at 1.5 fps.)
#6507	$328.00	Quantity:
24" X 24" HIGH FLOW COVER AND FRAME 24" x 24" Cover and frame Floor/Wall: 1444 GPM at 1.3 fps. (Floor/Wall: 1600 GPM at 1.5 fps.)
#6508	$746.00	Quantity:

STAINLESS STEEL ANTI - ENTRAPMENT COVERS

Available sizes, 20" x 20", 26" x 26", 32" x 32", 44" x 44". Designed to fit over existing main drain. Approved for floor and wall installations. The below stainless steel covers are designed to be installed on a flat surface.

20" X 20" ASME APPROVED COVER Maximum flow rate is 223 gpm. Acceptable connecting pipe sizes are 3", 4", 6" and 8"
#6509	$967.00	Quantity:
26" X 26" ASME APPROVED COVER Maximum flow rate is 495 gpm. Acceptable connecting pipe sizes are 4", 6", 8" and 10"
#6510	$1,070.00	Quantity:
32" X 32" ASME APPROVED COVER Maximum flow rate is 675 gpm. Acceptable connecting pipe sizes are 6", 8", 10" and 12"
#6511	$1,488.00	Quantity:
44" X 44" ASME APPROVED COVER Maximum flow rate is 975 gpm. Acceptable connecting pipe sizes are 8", 10", 12" and 14"
#6512	$1,894.00	Quantity:

HAYWARD DRAIN COVERS

–Meets all applicable requirements –NSF listed to ASME/ANSI #A112.19.8 2007 –Genuine Hayward Replacement Part

8" ROUND ASME/ANSI APPROVED COVER 8" Round Drain Rated flow floor/wall 125 gpm 1 ft./sec., 25.2 gpm 1 1/2 ft./sec., 37.5 gpm 2 ft./sec., 50.5 gpm 3 ft./sec., 75.7 gpm
#6513	$28.70	Quantity:
9" X 9" ROUND ASME/ANSI COVER W/INNER FRAME 9" x 9" Square Drain Rated flow floor 112 gpm, floor 83 gpm 1 ft./sec., 55.5 gpm 1 1/2 ft./sec., 83.3 gpm 2 ft./sec., 111 gpm 3 ft./sec., 166.6 gpm
#6514	$87.10	Quantity:
12" X 12" ROUND ASME/ANSI COVER INNER FRAME 12" x 12" Square Drain Rated flow floor 256. Wall 112 gpm 1 ft./sec., 100.9 gpm 1 1/2 ft./sec., 151.4 gpm 2 ft./sec., 201.8 gpm 3 ft./sec., 302 gpm
#6515	$166.00	Quantity:
18" X 18" ROUND ASME/ANSI COVER INNER FRAME 18" x 18" (4 9" x 9" covers) Square Drain Rated flow floor 560 gpm 1 ft./sec., 222.1 gpm 1 1/2 ft./sec., 333.1 gpm 2 ft./sec., 444.2 gpm 3 ft./sec., 666.2 gpm
#6516	$288.00	Quantity:

PIPE RECIRCULATION SYSTEM

PIPE RECIRCULATION SYSTEM
#PRS	Call For Pricing

CONTINUOUS RECIRCULATION SYSTEM

CONTINUOUS RECIRCULATION SYSTEM
#CRS	Call For Pricing

TRADITIONAL RECIRCULATION SYSTEM

TRADITIONAL RECIRCULATION SYSTEM
#TRS	Call For Pricing

SURGE RECOVERY RECIRCULATION SYSTEM

SURGE RECOVERY RECIRCULATION SYSTEM
#SRRS	Call For Pricing

HIGH FLOW FRAME

Robust Design For Heavy Duty Applications Any width and length with panels custom fabricated up to 6' x 6' . • 3/8" x 3/4" high tube spaced 3/8" • 40% open surface ASME 112.19.8a-2008 Compliant • passed all applicable requirements for field fabricated grates -Vertical, Horizontal, Point and Pull Loads -750 hour UV test requirements High Impact PVC in White, Blue, Sand, Black, Almond and Gray . astm c-1028 Static Coefficient of friction, wet and dry. • anti skid top Fastening Set containing • 1/4" - 20 x 3 1/2" 316 stainless steel screw • 1/4" - 20 stainless steel drop in anchor • matching pvc cap

HIGH FLOW FRAME
#6926	$83.10	Quantity:

REGULAR FLOW FRAME

Our Strongest Design Any width and length with panels custom fabricated up to 6' x 6'. • 1 1/8" x 3/4" high tube spaced 3/8" • 29% open surface asme 112.19.8a-2008 Compliant • passed all applicable requirements for field fabricated grates -Vertical, Horizontal, Point And Pull Loads -750 hour uv test requirements High Impact Pvc In White, Blue, Sand, Black, Almond and Gray • astm c-1028 Static Coefficient of friction, wet and dry • anti skid top Fastening Set containing • 1/4" - 20 x 3 1/2" 316 stainless steel screw • 1/4" - 20 stainless steel drop in anchor • matching pvc cap

REGULAR FLOW FRAME
#6927	$68.33	Quantity:

HIGH FLOW FRAME

HIGH FLOW FRAME
#6928	$44.48	Quantity:

REGULAR FLOW FRAME

Any width and length possible with multiple sequential panels each custom fabricated up to 4' x 4'. • 1 1/8" x 3/4" high, tube spaced 3/8" apart • 29% open surface exceeds 750 hour uv test requirements for asme 112.19.8a-2008 High Impact PVC In White, Blue, Sand, Black, Almond and Gray astm c-1028 Static Coefficient of friction, wet and dry • anti skid top Fastening Set containing • 1/4" - 20 x 3 1/2" 316 stainless steel screw • 1/4" - 20 stainless steel drop in anchor • color matched PVC cap

REGULAR FLOW FRAME
#6929	$42.80	Quantity:

CONCRETE CASTING FOAM

Formed to your specification, length, width, depth, straight or radius from high density 1 1/2 to 2 lb raw foam. 10 mil coating with "Tough Coat" polyurethane for strength and reusability. Provided in varying lengths from 48" to 72". Connecting staples are provided for each joint along with manufacturer's releasing agent that us applied before concrete application. Form removal is recommended before complete concrete curing has taken place along with the proper disposal of unwanted material. Call with your specifications for pricing.

CONCRETE CASTING FOAM
#CC Foam	Call For Pricing

GUTTERS - CUSTOM MADE PERFECT FIT

Our gutters are custom-made for your project materials to meet the requirements of your pool design: fiberglass, or casting foam. Whether you want a clean, smooth or concrete finish, we have the gutter design for you. Our gutters are fast and easy to assemble on site and feature a unique self-leveling design. Have something special in mind? Let our years of experience and state of the art manufacturing capabilities produce the gutter design that will make your pool stand out from the competition.

FIBERGLASS GUTTER Custom molds form this FRP gutter. Fabricated from UV-Stablizied gel coat (inside gutter finish) and fiberglass for a 1/8" finished wall thickness. FRP water stops full running length of gutter. Provided in varying lengths from 48" to 96". Easy to assemble and flanged ends complete with flange sealant, stainless steel nut, bolt, and washer. Reinforced outlets integrated into gutter body as required. FRO leveling struts.
#FRP Gutter	Call For Pricing

DURAMAX TRIO

Pools over 150’ and up to 25-'long, all surface types (tiles, steel, vinyl, aggregate). Any configuration (River - L - Freeform - Rectangular). 12,000 GPH maximum filtration/circulation. Engineered for maximum durability & reliability. Separate individually sealed three pump and three drive motors. 4-directional wireless remote control (guidance or automatic modes). 150' floating cord. Patented power washing/hyroscrubbing jets. Programmable 1 hour auto-start delay. Weight 65 lbs. 2 year warranty. 50" length x 16" width x 12" height.

DURAMAX TRIO
#6562	$5,987.00	Quantity:
SPARE FILTER BAGS (2 REQUIRED)
#AP8101	$72.36	Quantity:

DURAMAX DUO

Pools up to 150’ long, all surface types (tiles, steel, vinyl, aggregate). Any configuration (River - L - Freeform - Rectangular). 12,000 GPH maximum filtration/circulation. Separate individually sealed single pump and two drive motors. 4-directional wireless remote control (guidance or automatic modes). 120' floating cord. Patented power washing/hyroscrubbing jets. Programmable 1 hour auto-start delay. Weight 47 lbs. 2 year warranty. 34" length x 15" width x 12" height.

DURAMAX DUO
#6561	$5,453.00	Quantity:
SPARE FILTER BAGS (2 REQUIRED)
#AP8101	$72.36	Quantity:

DURAMAX DUO JR.

Pools up to 25 meter, all surface types (tiles, steel, vinyl, aggregate). Any configuration (River - L - Freeform - Rectangular). 12,000 GPH maximum filtration/circulation. Separate individually sealed single pump and two drive motors. 4-directional wireless remote control (guidance or automatic modes). 120' floating cord. Programmable 1 hour auto-start delay. Weight 41 lbs. 2 year warranty. 26" length x 15" width x 12" height.

DURAMAX DUO JR.
#6560	$4,267.00	Quantity:
SPARE FILTER BAG
#AP8101	$72.36	Quantity:

DURAMAX BITURBO T2

Pools up to 25 meters long, all surface types (tiles, steel, vinyl, aggregate). Any configuration (River - L - Freeform - Rectangular). 12,000 GPH maximum filtration/circulation. Separate individually sealed single pump and two drive motors. 4 button dual directional wireless remote control (guidance or automatic modes). Patented directional guidance clutch for greater efficiency & all shape coverage. 120' floating cord. Programmable 1 hour auto-start delay. Weight 37 lbs. 2 year warranty. 26" length x 15" width x 12" height.

DURAMAX BITURBO T2
#6559	$3,788.00	Quantity:
SPARE FILTER BAG
#AP8101	$72.36	Quantity:

DOLPHIN DYNAMIC PROX 2

(Recommended For Commercial Pools up to 82 Feet in Length) New Features Include: • Extra robust robot designed for widely used commercial pools. • Conforms to ETL and CE regulatory standards. • Scrubs, brushes, vacuums and filters the entire pool floor, walls and water line in less than 6 hours. • Large filter surface collects dirt, debris and dust particles. • Designed for long-lasting performance. • State-of-the-art self-learning scanning programs, optimizing pool coverage. • Wireless remote control for manual programming and navigation. • Wide range of cleaning programs and parameters: cycle tme, pool length, climbing frequency, regular or ultra clean, lap pool, waterline. • Helps to evenly disperse chlorine and other chemicals. • Advanced dual motor maneuverability for efficiant performance. • Patented swivel prevents cable tangling. • Clogged filter bag indicator ensures ongoing cleaning efficiency. • Equipped with caddy for handling and storage. • 24 month warranty - parts and labor.

DOLPHIN DYNAMIC PROX 2
#6564	$3,098.00	Quantity:
DOLPHIN REPLACEMENT FILTER BAG (ONE REQUIRED)
#5569	$69.99	Quantity:

DURAMAX RC

Pools up to 75’ long, all surface types (tiles, steel, vinyl, aggregate). Any configuration (River - L - Freeform - Rectangular). 6,000 GPH maximum filtration/circulation. Separate individually sealed single pump and two drive motors. 4-directional wireless remote control (guidance or automatic modes). 120' floating cord. Programmable 1 hour auto-start delay. Weight 37 lbs. 2 year warranty. 26" length x 15" width x 12" height.

DURAMAX RC
#6558	$2,989.00	Quantity:
SPARE FILTER BAG
#AP8101	$72.36	Quantity:

DURAMAX

Pools up to 75’ long, all surface types (tiles, steel, vinyl, aggregate). Any configuration (River - L - Freeform - Rectangular). 6,000 GPH maximum sealed single drive and pump motors. Patented arc radius floor-turning (30% greater efficiency & all shape coverage. 3-directional wireless remote control (guidance or automatic modes). 120' floating cord. Weight 33 lbs. 2 year warranty. 26" length x 15" width x 12" height.

DURAMAX
#6557	$2,765.00	Quantity:
SPARE FILTER BAG
#AP8101	$72.36	Quantity:

2" X 100 FT LENGTH, DISCHARGE HOSE

2" X 100 FT LENGTH, DISCHARGE HOSE
#2035	$437.00	Quantity:

FLOATING DISCHARGE HOSE (2” X 100 FT.)

can be fitted to all WEDA machines allowing the removal of heavy sediment without the worry of clogging the filter bags

FLOATING DISCHARGE HOSE (2” X 100 FT.)
#2035	$437.00	Quantity:

2" X 75 FT LENGTH, DISCHARGE HOSE

2" X 75 FT LENGTH, DISCHARGE HOSE
#2034	$336.00	Quantity:

HEAVY DUTY METAL VACUUM - 18" LONG

Housing made of chrome, bronze and polished anodized aluminum.
Length 18"
Fits 2" vacuum hose only.
Handle and hardware stainless steel.
Includes spring loaded brush.

HEAVY DUTY METAL VACUUM - 18" LONG
#5201	$269.10	Quantity:

2" X 50 FT LENGTH, DISCHARGE HOSE

2" X 50 FT LENGTH, DISCHARGE HOSE
#0415	$229.05	Quantity:

COMMERCIAL VACUUM HEAD

This 29" vacuum head is designed to perform on low flow suction. An exclusive chamber increases vacuum velocity and pulls debris equally from both ends, as well as front and back. The adjustable wheels can increase or decrease the suction, and special strips guide debris into a suction chamber. Vacuum head is built with "short leg" strips for leaves and large debris. Suitable for vacuuming sand, silt, and other fine debris. (for use with 1 ½' and 2" vacuum hose)

COMMERCIAL VACUUM HEAD
#5544	$189.90	Quantity:

COMMERCIAL DUTY VACUUM - 18" LONG

Aluminum body.
Fits 1 ½" vacuum hose.
Heavy duty handle fits standard 1 ¼" pole.
“The Professional’s Choice”.
Includes spring loaded brush.
Adjustable wheels.

COMMERCIAL DUTY VACUUM - 18" LONG
#5200	$118.70	Quantity:

LIGHT DUTY COMMERCIAL VACUUM - 14" LONG

Aluminum body.
Adjustable wheels.
Heavy duty handle fits standard 1 ¼" pole.
Fits 1 ½" vacuum hose.
Includes spring loaded brush.

LIGHT DUTY COMMERCIAL VACUUM - 14" LONG
#5203	$78.20	Quantity:

COMMERCIAL GRADE VACUUM AND UTILITY POLES

Our heavy duty, commercial grade utility poles are made from the heaviest drawn tubing we could find. These poles are extremely durable, noncorrosive and are ideal for use with vacuum heads, leaf rakes and shepard’s crooks (solid poles only).
*Must ship by truck

8 - 16 FT. TELESCOPING POLE
#0416	$78.05	Quantity:
16 FT. POLE*
#0419	$79.40	Quantity:
*8-24 FT. TELESCOPING POLE (SHIPS VIA UPS)**
#5800	$137.60	Quantity:
3, 8 FT. POLES ATTACH TOGETHER TO MAKE ONE 24 FT. POLE
#2007	$99.50	Quantity:
4, 8 FT. POLES BOLT TOGETHER TO MAKE ONE 32 FT. POLE - DISCONTINUED DISCONTINUED SEE ITEM #0419B
#3055	$115.75	Quantity:
9' - 32' TELESCOPING POLE*
#0419B	$188.05	Quantity:

HEAVY DUTY VACUUM HOSE

Our heavy duty vacuum hose is designed for the most demanding commercial applications. The wall diameter of our hose is thicker than other commercial vacuum hoses and the quality construction offers maximum UV resistance. Our hose can be used for both suction and discharge purposes.
SIZES AVAILABLE:

1 1/2" X 25' LENGTH
#0411	$66.80	Quantity:
1 1/2" X 40' LENGTH
#0413	$99.80	Quantity:
1 1/2" X 50' LENGTH
#0414	$127.10	Quantity:
1 1/2" X 75' LENGTH
#2033	$197.10	Quantity:
2" X 50' LENGTH
#0415	$229.05	Quantity:
2" X 75' LENGTH
#2034	$298.00	Quantity:
2" X 100' LENGTH
#2035	$437.00	Quantity:
1 1/2" BACKWASH HOSE-PRICED BY THE FT.
#2036	$0.74	Quantity:
2" BACKWASH HOSE (PRICED BY THE FT.)
#2037	$0.84	Quantity:

PROFESSIONAL FLEXIBLE VACUUM HEAD

19” wide body with urethane ball bearing wheels and swivel metal handle. The vacuum for the pool professional who demands the best! For use with 1 1/2” or 2” vacuum hose.

PROFESSIONAL FLEXIBLE VACUUM HEAD
#6294	$59.90	Quantity:

PROFESSIONAL FLEXIBLE VACUUM HEAD

14” wide body with urethane ball bearing wheels and swivel metal handle for use with 1 1/2” or 2” vacuum hose.

PROFESSIONAL FLEXIBLE VACUUM HEAD
#6293	$49.75	Quantity:

STANDARD FLOW PERPENDICULAR EXTRUDED PVC OVERFLOW 25% OPEN SURFACE AREA

• ASM E-661-92 load to failureand deflection at 200 lbs • Anti - Skid surface. • ASTM C-1028 Static Coefficient of friction, wet and dry • ASTM G-154, 750 Hours UV • Fasteners at 3 ft intervals • Custom lengths up to 72" long • Supplied in standard section lengths of 36" Grate shall be fabricated out of high impact PVC and shall use tubing that is 1-1/8" (w) x 3/4" (h). Anti-skid surface is spaced 3/8" apart. Tube shall be permanently affixed to trim pieces to created a solid grating section.

6" GRATING PER LINEAR FOOT
#6900	$23.93	Quantity:
12" GRATING PER LINEAR FOOT
#6901	$39.35	Quantity:
18" GRATING PER LINEAR FOOT
#6902	$58.58	Quantity:
24" GRATING PER LINEAR FOOT
#6903	$76.51	Quantity:
30" GRATING PER LINEAR FOOT
#6904	$96.23	Quantity:
6" CORNER
#6905	$95.58	Quantity:
12" CORNER
#6906	$198.27	Quantity:
18" CORNER
#6907	$296.00	Quantity:
24" CORNER
#6908	$392.00	Quantity:
30" CORNER
#6909	$487.00	Quantity:

HIGH FLOW PERPENDICULAR EXTRUDED PVC INTERLOCKING 50% OPEN SURFACE AREA

• ASTM C-1028 Static Coefficient of friction, wet and dry • ASM E-661-92 load to failureand deflection at 200 lbs • Anti - Skid surface. • ASTM G-154, 750 Hours UV • Custom lengths up to 72" long • Supplied in standard section lengths of 36" • Able to conform to various radii as tight as 24" • Fasteners at 3 ft intervals Grate shall be fabricated out of high impact PVC and shall use tubing that is 1-1/8" (w) x 3/4" (h). Anti-skid surface is spaced 3/8" apart. Tube shall be permanently affixed to trim pieces to created a solid grating section.

HIGH FLOW GRATING 6" PER LINEAR FOOT
#6916	$20.40	Quantity:
HIGH FLOW GRATING 12" PER LINEAR FOOT
#6917	$40.62	Quantity:
HIGH FLOW GRATING 18" PER LINEAR FOOT
#6918	$57.15	Quantity:
HIGH FLOW GRATING 24" PER LINEAR FOOT
#6919	$76.17	Quantity:
HIGH FLOW GRATING 30" PER LINEAR FOOT
#6920	$92.05	Quantity:
6" CORNER
#6921	$98.73	Quantity:
12" CORNER
#6922	$197.46	Quantity:
18" CORNER
#6923	$271.86	Quantity:
24" CORNER
#6924	$362.94	Quantity:
30" CORNER
#6925	$449.15	Quantity:

MEDIUM FLOW PERPENDICULAR INJECTION MOLDED PVC OVERFLOW 37.5% OPEN SURFACE AREA

• ASM E-661-92 load to failureand deflection at 200 lbs • ASTM C-1028 Static Coefficient of friction, wet and dry • ASTM G-154, 750 Hours UV • Able to conform to various radii as tight as 24" • Anti - Skid surface. Grate shall be fabricated out of high impact PVC and shall use tubing bars that are 5/8" wide x 1" high. Bars to have molded anti-skid surface and be spaced 3/8" apart.

MEDIUM FLOW GRATING PER LINEAR FOOT
#6910	$16.51	Quantity:
MEDIUM FLOW GRATING PER LINEAR FOOT
#6911	$29.10	Quantity:
MEDIUM FLOW GRATING PER LINEAR FOOT
#6912	$60.90	Quantity:
6" CORNER
#6913	$91.68	Quantity:
12" CORNER
#6914	$189.00	Quantity:
16" CORNER
#6938	$258.00	Quantity: