New Swimming Pool Equipment
Products:
WEDA W50R
RELATED PRODUCTS:
Our new Weda W50R is a very reliable pool cleaner, designed to last for many years with a minimum amount of maintenance. Designed for a 75ft. - 25 meter (82ft.) swimming pool. Like the other Weda vacuums, these cleaners are second to none when it comes to their quality and reliability.
No plastic impellars, motors, frames or transmissions!
The W50R comes standard with the following features:
• 130ft power cord.
• Hand held wireless remote control.
• State of the art laser control gives you continuous operation without interruption.
• Zero depth reversing feature for “beach front” type pools.
• P.L.C. pattern option which enables you to program the cleaner to be taught up to 7 different cleaning patterns allowing for more efficiency and faster cleaning times.
• Front and back high speed rotating brushes that scrubs the pool surface.
See Specifications
|
| WEDA W50R | ||
RELATED PRODUCTS:
| HOSE DISCHARGE ADAPTER (ORDER HOSE SEPARATELY, SEE BELOW) | ||
2" X 100 FT LENGTH, DISCHARGE HOSE |
||
2" X 75 FT LENGTH, DISCHARGE HOSE |
||
OPTIONAL CADDY CART The Caddy Cart will make it easy to transport your pool vacume from the storage room to the pool deck.. When not in use the vacuum and all of its accessories fit perfectly on the caddy cart to provide years of trouble free, easy transportation use. |
||
WEDA W50R FILTER BAG |
||
2" X 50 FT LENGTH, DISCHARGE HOSE |
||
"3B" SERIES
A series of 4” x 3” self-priming, centrifugal pumps for commercial pools. The design includes a large 331 cubic-inch integral strainer with a stainless-steel basket. Available in 5 and 7-1/2 hp sizes, these high-efficiency designs provide maximum performance. Capable of providing an eight-hour turnover rate for pools up to 192,000 gallon capacity when used with pressure-type sand, cartridge or diatomaceous earth filters.
|
| MARLOW "3B" SERIES PUMPS | ||
"4SPC" SERIES
This line of 6” x 4” self-priming, centrifugal pumps is perfect for larger commercial pools, water features, fountains, and waterpark applications. Designed with an extra large, integral pump strainer (over 1,100 cubic inches of volume with a corrosion-proof, stainless steel basket), the 4SPC Series features an enclosed, bronze impeller for high efficiencies and low NPSH requirements. Available from stock in 10, 15 and 20 hp sizes with three phase motors and also with a 10 hp single phase motor. Utilizes 1,750 RPM motors for whisper-quiet operation and extended service life.
|
| MARLOW "4SPC" SERIES PUMPS | ||
STOCK LINE "L" SERIES
The L Series is a commercial-size, end suction centrifugal pump line built with the time proven quality Marlow features that assure enduring performance. Available from stock in 5, 7-1/2, 10, 15 and 20 hp sizes with three phase motors. A 10 hp, single phase model is also available from stock. Bronze, enclosed impellers provide quiet, efficient, vibration-free performance. Designed for optimum hydraulic efficiencies to meet today’s demanding energy conservation requirements.
|
| MARLOW "L" SERIES PUMPS | ||
MARLOW "530" SERIES PUMPS The 530 Series end suction centrifugal pumps allow you to meet almost every flow condition. Impellers can be trimmed to a specific diameter to satisfy tour exact pumping requirements resulting in lower operating costs. This series is available close-coupled (in horizontal or vertical mounting configurations) or frame mounted with 1150, 1750 or 3450 rpm motors; 1 through 150 hp; with sizes to 10”. The 530 Series is perfect for all commercial pool, water feature, fountain and waterpark applications. |
||
VORTEX SLIDES
• 7´6¨ Tall with a 19´ Run
• Rotomolded + Steel Frame
• Corkscrew Design
• Open or Closed Flume
• Spiral Staircase or Ladder
• On Deck Mount – No Footings
• CPSC Compliant
|
| FULL TUBE WITH LADDER, COLOR GRANITE GRAY | ||
FULL TUBE WITH SPIRAL STAIRCASE, COLOR GRANITE GRANITE GRAY |
||
FULL TUBE WITH LADDER, COLOR BLUE |
||
FULL TUBE WITH SPIRAL STAIRCASE, COLOR BLUE |
||
KINDER SLIDE
The Kinder slide is a UV protected low density polyethylene open with stainless steel ladder and non-slip plastic treads.
|
| KINDER SLIDE | ||
| Color: | ||
KINDER ANCHORS, 2 REQUIRED |
||
REVOLUTION LIFT WITH 500 LB CAPACITY!
Brock has developed another innovative and versatile lift designed for use on BOTH in ground pools and spas! This innovative new lift takes many of the features customers have been requesting the most: a versatile lift that can be adapted to most pools and also can accommodate heavier patrons! That´s right; the NEW REVOLUTION actually has a weight capacity of 500 lbs [226 kg]!! That is 100 lbs [45 kg] more than the standard weight capacity of most of the lifts on the market today!
|
| REVOLUTION LIFT | ||
SPARE BATTERY |
||
HEADREST |
||
CHEST STRAPS |
||
ASPEN BATTERY POWERED LIFT
Designed for installation in the decks of in-ground and above-ground pools/spas, ADA/ABA compliant battery powered 1 ft has a safe and easy operating system. Rotationally and vertically powered allowing patrons to move left and right and up and down. Accommodates a setback of 6” to 28”.
|
| SWIM-LIFT® ASPEN BP300 | ||
ANCHOR W/LID AND KEY |
||
RAINDROP SPRAY UMBRELLA
Our rain drop spray
umbrella is our most popular spray feature. Measuring 12ft in diameter, this product will provide endless fun, excitement and will increase attendance at your facility. Pump to be ordered separately. Please call us with your specifications.
|
| RAIN DROP, SPRAY UMBRELLA (ORDER PUMP SEPARATELY) | ||
| Color: |
LOOKOUT DUAL SIDE MOUNT LIFEGUARD CHAIR
The lookout dual side mount lifeguard chair features easy access on and off of the chair from both sides. This model is ideal for pool decks with limited deck space or if lifeguard shifts require simultaneous change. The chair seat is at a height of 4’ 6” above the pool deck and is mounted on a stainless steel sloping support pedestal, shall be capable of a full 360ş rotation. The fiberglass platform measures 4’ 0” square and is located 3’ 0” above the pool deck.
|
| LOOKOUT DUAL SIDE MOUNT LIFEGUARD CHAIR | ||
HYALITE LIFEGUARD CHAIR
This unique lifeguard chair has been designed to conform to OSHA regulations. All guardrails are a specific height and forward distance from the platform. Features include a rear access ladder, and non-slip platform top.
|
| HYALITE, 6FT PERMANENT GUARD CHAIR | ||
HYALITE ANCHOR KIT The Hyalite lifeguard chair anchor assemblies consist of steel anchor bolts with setting jig and two ladder rail wedge type anchors. |
||
DISCOVERY LIFEGUARD CHAIRS
The lightweight yet study unit enables the lifeguard to oversee any portion of the pool in seconds. Optional Ballast Systems provide stability to portable platforms. Order Ballast separately, see page 51.
|
| 5' DISCOVERY MOVEABLE GUARD CHAIR | ||
6' DISCOVERY MOVEABLE GUARD CHAIR |
||
PLATFORM BALLAST SYSTEM FOR DISCOVERY W/MOUNTING HARDWARE Designed to provide the needed stability for Spectrum Discovery and Marshall guard stands. Excellent for outdoor use - high wind areas. The Ballast System allows for easy attachment to most existing Spectrum portable lifeguard chairs. • Molded of linear Low- Density Polyethylene, UV inhibitor • Molded-in graphics • Equipped with top and side mounted fill and drain ports • Weighs approximately 185 lbs. when filled with water • Drill bit to drill mounting holes into the existing platform and hardware is provided • For Spectrum Discovery and Marshall lifeguard chairs only. |
||
TORREY II LIFEGUARD CHAIRS
The Torrey II is ready moveable and enables the lifeguards a rapid exit while maintaining an excellent line of sight. It also eliminates the hazards associated with elevated platforms.
|
| 36" TORREY II, MOVEABLE GUARD CHAIR | ||
42" TORREY II, MOVEABLE GUARD CHAIR |
||
48" TORREY II, MOVEABLE GUARD CHAIR |
||
HEAVY DUTY PVC POOL ACCESS CHAIR
• 400 lb [181 kg] weight capacity
• 24¨ [61 cm] Wide Seat
• Swing our armrest for lateral transfers
• Sliding Footrest
• Non-rusting design for pool & shower environments
• Anti-tip design
|
| HEAVY DUTY PVC POOL ACCESS CHAIR WITH 400 LBS [181 KG] CAPACITY | ||
SPVC POOL ACCESS CHAIR
The Pool Access Chair is an ideal solution to getting patients in and out of the pool via a platform lift or ramp. With super-strong PVC construction and an anti-tip
design, these non-rusting chairs are designed to operate in pool water environments and showers.
|
| POOL ACCESS CHAIR | ||
OPTIONAL LAP BELT |
||
BEACH ACCESS CHAIR
This sturdy light-weigth all-terrain chair allows easier access in sand, snow, and other soft soils. Four balloon flotation tires give the chair extra stability that resists tipping and corners better than three wheel designs. The unit comes standard with single motion park brakes, safety belt, umbrella, sliding footrest, storage bag and comfortable cushion seat. The chair quickly disassembles into three pieces for easy transport.
|
| W/2 ARTICULATED WHEELS | ||
W/4 LARGE WHEELS |
||
JUNIOR STORAGE REEL
Junior Storage Reels are designed especially for smaller commercial applications. they incorporate all of the features that have made our Heavy Duty models the industry leader for decades in a compact package. The Junior is made entirely of 304 stainless steel. The heavy wall frame features “slip joint” construction, which allows the Junior to be shipped unassembled to reduce freight charges. The Junior comes standard with a single 12” handcrank. Also standard are two of our solid stainless steel screw jack brakes. Our Heavy Duty brakes have been scaled down and integrated into the frame. The winding tube is the same unit that is used on our Heavy Duty models, as are the bearings. Four stainless steel casters with urethane wheels are attached to the frame ends at the factory. Capacity is 80 lineal feet.
Dimensions: Width: 80", Height: 24", Length: available in lengths from 8' to 16' in 1 foot increments.
|
| 8' JUNIOR STAINLESS STEEL STORAGE REEL | ||
9' JUNIOR STAINLESS STEEL STORAGE REEL |
||
10' JUNIOR STAINLESS STEEL STORAGE REEL |
||
11' JUNIOR STAINLESS STEEL STORAGE REEL |
||
12' JUNIOR STAINLESS STEEL STORAGE REEL |
||
13' JUNIOR STAINLESS STEEL STORAGE REEL |
||
14' JUNIOR STAINLESS STEEL STORAGE REEL |
||
15' JUNIOR STAINLESS STEEL STORAGE REEL |
||
16' JUNIOR STAINLESS STEEL STORAGE REEL |
||
STANCHION POST
|
| 4’6” HIGH (1.900” O.D. X .065 WALL THICKNESS) | ||
8’0” HIGH (1.900” O.D. X .065 WALL THICKNESS) |
||
4’6” HIGH (1.900” O.D. X .109 WALL THICKNESS) |
||
8’0” HIGH (1.900” O.D. X .109 WALL THICKNESS) |
||
4’6” HIGH (1.900” O.D. X .145 WALL THICKNESS) |
||
8’0” HIGH (1.900” O.D. X .145 WALL THICKNESS) |
||
SLIDING COLLAR WITH EYE BOLT |
||
ROCK-THE-HOUSE WATER BASKETBALL
Our new Rock-the-House Water Basketball for in-ground, on-ground and above-ground pools with decks features a winged backboard that helps corral airballs and return them to the players. Smart players can also use the wings to score points off the angled backboard. The backboard is set atop our rugged, interchangeable base that fills with pool water or sand for extra stability. Both the backboard and base are rotationally molded of polyethylene to withstand rain, snow, chlorine and sunlight for years. The all-plastic design has no metal parts to rust, it assembles in a snap and can stay outside year-round.
|
| ROCK THE HOUSE BASKETBALL | ||
EXTRA BASKETBALL |
||
PITCHER'S DUEL BASEBALL
Our new baseball game turns your in-ground or above-ground pool with a deck into a water baseball stadium. Pitchers throw regulation sized, waterproof wiffle balls into four target holes to score points. Strikes pitched into the holes are caught by the oversized catcher´s mitt and returned into the water towards the pitcher. Balls pitched near the strike zone are also blocked by the big mitt so no one has to get out of the pool to chase the ball. The rugged base that fills with water or sand for extra stability. Both durable parts are rotationally molded of polyethylene to withstand rain, snow, chlorine and sunlight for years. The all-plastic design has no metal parts to rust, it assembles in a snap and can stay outside year-round.
|
| PITCHERS DUEL BASEBALL GAME | ||
EXTRA BASEBALL |
||
AUTOMATED WATER LEVEL CONTROLLER
The model ELC-800 Water Level Controller is a state of the art device designed to maintain precise water levels for commercial and residential swimming pools and spas. Unlike systems that use floats and other moving parts or introduce an electrical current into the water, the ELC-800 uses a proximity sensor to measure the water level accurately and to automatically activate the auto water make-up control valve. The proximity sensor is precise enough to satisfy the State Department of Health and the operators strict standard for clean and clear water. It utilizes micro-processor technology to control all water level functions. The status at a glance lights clearly indicate the operating status of the unit to ensure accurate water level control at all times.
|
| AUTOMATED WATER LEVEL CONTROLLER | ||
AXS LIFT WITH WIRED CONTROL
OPTIONAL EQUIPMENT:
The aXs is specifically designed for facilities who are seeking a sensible solution for providing access to their swimming pools for users with special needs.
The aXs Lift is easy to operate and maintain, is transportable, reliable, and affordable. In addition, the aXs features an attractive design which blends into any pool environment without projecting an institutional appearance.
Standing a mere 32 inches above the deck, the aXs provides 360° rotation to insure sufficient clear deck space for safe transfers. The aXs is intended to be used with simple pool gutter configurations having a deck to water distance of no more than six inches.
The aXs is fabricated using both aluminum extrusions and stainless steel. All surfaces are treated with a tough and attractive powder coated finish to protect against prolonged exposure to elements. Custom colors are available. The housing is formed from ABS plastic with an acrylic cap to minimize discoloration due to exposure to the sun.
With a lifting capacity of 300 pounds, the aXs meets all Americans with Disabilities Act Accessibility Guidelines (ADAAG), and features our exclusive seating system. This system, designed by people with disabilities, is wider and deeper than most conventional seats, and has no edges to restrict transfers.
Our aXs Lift offers an intuitive handset in both a wired or wireless configuration. The handset controls all operations of the lift and is designed to be used by the individual using the chair.
|
| AXS LIFT WITH WIRED CONTROL | ||
AXS LIFT WITH WIRELESS CONTROL |
||
OPTIONAL EQUIPMENT:
AXS CADDY CART |
||
AXS SPINE BOARD ATTACHMENT SPINEBOARD NOT INCLUDED |
||
AXS ARM REST |
||
AXS SPARE BATTERY |
||
PROTECTIVE COVER FOR AXS LIFT |
||
AXS STABILITY UNIT |
||
AXS BATTERY CHARGER |
||
50" LIFEGUARD CHAIR
Our 50" (Seat Height) lifeguard chair is manufactured utilizing recycled plastic lumber and stainless steel fasteners, making it highly durable and virtually maintenance free. It never needs painting or staining. It will not rot or splinter and can be left outdoors year round. Contoured seat and curved back with wide arms. Comes with cup holder and umbrella holder. Can ship UPS. Specify color when ordering. Weight 150 lbs.
|
| 50" LIFEGUARD CHAIR (SPECIFY COLOR WHEN ORDERING) | ||
OPTIONAL WHEEL KIT |
||
HAYWARD STRATUM™ VRS
The Hayward Stratum VRS is the only SVRS to both vent the pump suction line to atmosphere and turn off powert to the pump monitor.
• Automatic restart in protection mode eliminates nuisance tripping.
• Complete self-testing diagnostics that perform a system check during each start-up.
• Directly monitors and reacts to change in suction outlet systems.
• Meets or exceeds all relevant ASME/ANSI and ASTM performance standards
• Installs in as little as one hour.
|
| HAYWARD STRATUM™ VRS | ||
STAINLESS STEEL ANTI - ENTRAPMENT COVERS
Available sizes, 20" x 20", 26" x 26", 32" x 32", 44" x 44". Designed to fit over existing main drain. Approved for floor and wall installations.
The below stainless steel covers are designed to be installed on a flat surface.
|
| 20" X 20" ASME APPROVED COVER
Maximum flow rate is 223 gpm. Acceptable connecting pipe sizes are 3", 4", 6" and 8" |
||
26" X 26" ASME APPROVED COVER Maximum flow rate is 495 gpm. Acceptable connecting pipe sizes are 4", 6", 8" and 10" |
||
32" X 32" ASME APPROVED COVER Maximum flow rate is 675 gpm. Acceptable connecting pipe sizes are 6", 8", 10" and 12" |
||
44" X 44" ASME APPROVED COVER Maximum flow rate is 975 gpm. Acceptable connecting pipe sizes are 8", 10", 12" and 14" |
||
76” VICTORIAN BENCH, 76”L X 27”W X 34”H, WT 95 LBS
These are the Backless Benches. These are multi-purpose benches than can be used throughout the pool facility. They have been used poolside for swim classes and meets, in locker rooms and showers, at the entrances for casual seating and waiting for rides, and in hallways and first aid areas. They are built with the same rugged, durability as the Lifeguard Chairs utilizing recycled plastic lumber and stainless steel fasteners. They will not rust, rot or splinter. Versatile for all climates and able to be left outdoors year round. Available in four colors: white, sand, cedar, and green.
The differences between this Backless Bench Model and the Dining / Flat Bench Model are this bench has a slight curve and has an additional board to the seat making it a wider seat and a bit more comfortable, but it sits lower in the center so it is best not used for dining and small children (their feet will not touch the ground).
|
| 76” VICTORIAN BENCH, 76”L X 27”W X 34”H, WT 95 LBS | ||
53” VICTORIAN BENCH, 53”L X 27”W X 34”H, WT 70 LBS
These are the Backless Benches. These are multi-purpose benches than can be used throughout the pool facility. They have been used poolside for swim classes and meets, in locker rooms and showers, at the entrances for casual seating and waiting for rides, and in hallways and first aid areas. They are built with the same rugged, durability as the Lifeguard Chairs utilizing recycled plastic lumber and stainless steel fasteners. They will not rust, rot or splinter. Versatile for all climates and able to be left outdoors year round. Available in four colors: white, sand, cedar, and green.
The differences between this Backless Bench Model and the Dining / Flat Bench Model are this bench has a slight curve and has an additional board to the seat making it a wider seat and a bit more comfortable, but it sits lower in the center so it is best not used for dining and small children (their feet will not touch the ground).
|
| 53” VICTORIAN BENCH, 53”L X 27”W X 34”H, WT 70 LBS | ||
70” BACKLESS BENCH, 70”L X 19”W X 17”H, WT 85 LBS
These are the Backless Benches. These are multi-purpose benches than can be used throughout the pool facility. They have been used poolside for swim classes and meets, in locker rooms and showers, at the entrances for casual seating and waiting for rides, and in hallways and first aid areas. They are built with the same rugged, durability as the Lifeguard Chairs utilizing recycled plastic lumber and stainless steel fasteners. They will not rust, rot or splinter. Versatile for all climates and able to be left outdoors year round. Available in four colors: white, sand, cedar, and green.
The differences between this Backless Bench Model and the Dining / Flat Bench Model are this bench has a slight curve and has an additional board to the seat making it a wider seat and a bit more comfortable, but it sits lower in the center so it is best not used for dining and small children (their feet will not touch the ground).
|
| 70” BACKLESS BENCH, 70”L X 19”W X 17”H, WT 85 LBS | ||
AXS CADDY CART
| AXS CADDY CART | ||
WHEEL KIT
• A universal wheel kit that fits all of our recycled plastic lifeguard chairs
• Easy installation for your new & existing lifeguard stand
• Use in sand, concrete or tile surfaces.
|
| WHEEL KIT (LIFEGUARD STAND SOLD SEPARATELY) | ||
47” FLAT BENCH, 47”L X 14”W X 17”H, WEIGHT 36 LBS.
These are the Backless Benches. These are multi-purpose benches than can be used throughout the pool facility. They have been used poolside for swim classes and meets, in locker rooms and showers, at the entrances for casual seating and waiting for rides, and in hallways and first aid areas. They are built with the same rugged, durability as the Lifeguard Chairs utilizing recycled plastic lumber and stainless steel fasteners. They will not rust, rot or splinter. Versatile for all climates and able to be left outdoors year round. Available in four colors: white, sand, cedar, and green.
The differences between this Backless Bench Model and the Dining / Flat Bench Model are this bench has a slight curve and has an additional board to the seat making it a wider seat and a bit more comfortable, but it sits lower in the center so it is best not used for dining and small children (their feet will not touch the ground).
|
| 47” FLAT BENCH, 47”L X 14”W X 17”H, WEIGHT 36 LBS. | ||
AXS SPINE BOARD ATTACHMENT SPINEBOARD NOT INCLUDED
| AXS SPINE BOARD ATTACHMENT SPINEBOARD NOT INCLUDED | ||
QUICKSET® DUAL WEDGE™ ANCHOR
Completing our Starting Platform package is the Quickset® Dual-Wedge™ Anchor. A combination of the patented taper lock base and NEW dual acting wedge design eliminates front-to-back and side-to-side movement.
The Dual-Wedge Assembly has an integral adjusting knob which is easily turned by hand to install and remove the platform without the need for tools.
The Dual-Wedge Assembly is a self-contained one-piece design readily removable and stored within the anchor when not in use. Anchor cover is included.
One piece anchor body constructed of heavy duty T304 stainless steel will never need replacement parts.
|
| QUICKSET® DUAL WEDGE™ ANCHOR | ||
47.5” BACKLESS BENCH, 47”L X 19”W X 17”H, WT 40 LBS
These are the Backless Benches. These are multi-purpose benches than can be used throughout the pool facility. They have been used poolside for swim classes and meets, in locker rooms and showers, at the entrances for casual seating and waiting for rides, and in hallways and first aid areas. They are built with the same rugged, durability as the Lifeguard Chairs utilizing recycled plastic lumber and stainless steel fasteners. They will not rust, rot or splinter. Versatile for all climates and able to be left outdoors year round. Available in four colors: white, sand, cedar, and green.
The differences between this Backless Bench Model and the Dining / Flat Bench Model are this bench has a slight curve and has an additional board to the seat making it a wider seat and a bit more comfortable, but it sits lower in the center so it is best not used for dining and small children (their feet will not touch the ground).
|
| 47.5” BACKLESS BENCH, 47”L X 19”W X 17”H, WT 40 LBS | ||
AXS ARM REST
| AXS ARM REST | ||
AXS SPARE BATTERY
| AXS SPARE BATTERY | ||
PROTECTIVE COVER FOR AXS LIFT
| PROTECTIVE COVER FOR AXS LIFT | ||
AXS STABILITY UNIT
| AXS STABILITY UNIT | ||
AXS BATTERY CHARGER
| AXS BATTERY CHARGER | ||
24” FLAT BENCH, 24”L X 14”W X 17”H, WEIGHT 25 LBS
These are the Backless Benches. These are multi-purpose benches than can be used throughout the pool facility. They have been used poolside for swim classes and meets, in locker rooms and showers, at the entrances for casual seating and waiting for rides, and in hallways and first aid areas. They are built with the same rugged, durability as the Lifeguard Chairs utilizing recycled plastic lumber and stainless steel fasteners. They will not rust, rot or splinter. Versatile for all climates and able to be left outdoors year round. Available in four colors: white, sand, cedar, and green.
The differences between this Backless Bench Model and the Dining / Flat Bench Model are this bench has a slight curve and has an additional board to the seat making it a wider seat and a bit more comfortable, but it sits lower in the center so it is best not used for dining and small children (their feet will not touch the ground).
|
| 24” FLAT BENCH, 24”L X 14”W X 17”H, WEIGHT 25 LBS | ||
AMSE/ANSI APPROVED DRAIN COVERS
Brock offers a variety of drain covers meeting all currently available requirements for NSF listed ASME/ANSI # A112.9.8 2007 main drain covers.
Please visit our website, www.brockent.com where you get to read The Virginia Graeme Baker Act.
|
| 9" X 9" HIGH FLOW COVER AND FRAME
9" x 9" Cover and frame Floor/Wall: 224 GPM at 1.6 fps. (Floor/Wall: 207 GPM at 1.5 fps.) |
||
12" X 12" HIGH FLOW COVER AND FRAME 12" x 12" Cover and frame Floor/Wall: 361 GPM at 1.3 fps. (Floor/Wall: 400 GPM at 1.5 fps.) |
||
18" X 18" HIGH FLOW COVER AND FRAME 18" x 18" Cover and frame Floor/Wall: 775 GPM at 1.4 fps. (Floor/Wall: 828 GPM at 1.5 fps.) |
||
24" X 24" HIGH FLOW COVER AND FRAME 24" x 24" Cover and frame Floor/Wall: 1444 GPM at 1.3 fps. (Floor/Wall: 1600 GPM at 1.5 fps.) |
||
HAYWARD DRAIN COVERS
| –Meets all applicable requirements –NSF listed to ASME/ANSI #A112.19.8 2007 –Genuine Hayward Replacement Part |
| 8" ROUND ASME/ANSI APPROVED COVER
8" Round Drain Rated flow floor/wall 125 gpm 1 ft./sec., 25.2 gpm 1 1/2 ft./sec., 37.5 gpm 2 ft./sec., 50.5 gpm 3 ft./sec., 75.7 gpm |
||
9" X 9" ROUND ASME/ANSI COVER W/INNER FRAME 9" x 9" Square Drain Rated flow floor 112 gpm, floor 83 gpm 1 ft./sec., 55.5 gpm 1 1/2 ft./sec., 83.3 gpm 2 ft./sec., 111 gpm 3 ft./sec., 166.6 gpm |
||
12" X 12" ROUND ASME/ANSI COVER INNER FRAME 12" x 12" Square Drain Rated flow floor 256. Wall 112 gpm 1 ft./sec., 100.9 gpm 1 1/2 ft./sec., 151.4 gpm 2 ft./sec., 201.8 gpm 3 ft./sec., 302 gpm |
||
18" X 18" ROUND ASME/ANSI COVER INNER FRAME 18" x 18" (4 9" x 9" covers) Square Drain Rated flow floor 560 gpm 1 ft./sec., 222.1 gpm 1 1/2 ft./sec., 333.1 gpm 2 ft./sec., 444.2 gpm 3 ft./sec., 666.2 gpm |
||
